\documentstyle[IWAFGR95,epsf]{article}
%\pagestyle{empty}

%%% Macro for vertically aligning a subfigure and its label.
%%% Example usage: \sublabel{a}{\psfig{ ... }}
\def\sublabel#1#2{ \begin{tabular}{l} #2 \\  (#1) \end{tabular}}
   %%{\vbox{#2 \hbox{\hfil (#1) \hfil}}}

\begin{document}

\title{ Instructions for Authors}

\author{Martin Bichsel \\
University of Zurich\\
Department of Computer Science\\
MultiMedia Laboratory\\ 
Winterthurerstrasse 190 \\
CH-8057 Zurich\\
Switzerland\\
E-mail: mbichsel@ifi.unizh.ch}
\maketitle
\begin{abstract}
These instructions to authors explain how to submit a paper to the International
Workshop on Face- and Gesture-Recognition 1995 (IWFGR95). 
A \LaTeX\  style is recommended and the way to obtain it is specified.
\end{abstract}

\section{Introduction}
Accepted papers will be collected in the proceedings of
 the conference. Authors intending to present a paper
at the IWFGR95 have to submit a four hardcopies of their contribution.
All accepted papers must be submitted as a hardcopy as well as in
electronic form. 

To assure that all the accepted papers
will abide by the same layout, and due to the short delay between the
notification of acceptance (March 31) and the date of the conference
 (June 26) the proceeding editors and the
Workshop Program Committee advise the authors to 
use the IWAFGR95 style. However, this is not a must.

\section{How to get the IWAFGR95 style?}
The IWAFGR95 style is described in the document {\tt IWAFGR95.sty}.
This style file as well as the current text are available by ftp as
follows:


\begin{tabbing}
{\tt ftp} \= {\tt ftp.ifi.unizh.ch} (or {\tt ftp 130.60.48.8})\\
{\tt cd} \> {\tt /pub/conferences/IWAFGR95}\\
{\tt get} \> {\tt IWAFGR95.tex }\=(these instructions in \LaTeX)\\
{\tt get} \> {\tt IWAFGR95.sty} \>(\LaTeX\  style file)\\
{\tt get} \> {\tt Figure.eps}   \>(example EPSF figure)
\end{tabbing}

Authors having difficulties with the \LaTeX\   style are strongly asked
to contact the IWAFGR local arrangement chairman (address above) as
soon as possible.

\section{How to proceed without \LaTeX ?} 
Authors unwilling to use \LaTeX\  may use another text processing
system, according to the
following rules (these non-\LaTeX\  files will be translated to \LaTeX\ 
by the proceedings editors for homogeneity reasons):
\begin{itemize}
\item  The final paper must  be accompanied by an electronic version
(mailed as uuencoded tar-file to mbichsel@ifi.unizh.ch or on floppy) containing
unformatted text and figures (figures in Encapsulated Postscript
Format (EPSF)).
\item   The format of the hard copy must agree with the following layout and
will look like the present paper:
\begin{itemize}
\item Page format: 15.5cm * 23cm
\item Font: Times 10pt
\item Interline spacing: 14 pt
\end{itemize}

\end{itemize}

\section{IWAFGR95 guide lines}
In any case (use of \LaTeX\  style or not), the following rules must be
respected when the final (accepted) paper will be sent:

\begin{itemize}
\item Papers must be shorter than 6 pages (5500 words for a text without figures).
\item Printed papers must be accompanied by an electronic version
(mailed as uuencoded tar-file to mbichsel@ifi.unizh.ch or on floppy)
\item standard fonts (Helvetica, Courier, etc.) may be used for
programs, meta-notations, or in figures.
\item Figures must fit inside the page format (15.5cm * 23cm). The editor
will reject figures bigger than this frame (no attempt will be made to
reduce them).
\item Figures must be in Encapsulated Postscript Format (EPSF) such as
the example file {\tt Figure.eps} which was used for 
Fig. \ref{Fig1}.
\item All needed material must be sent in electronic form:
drawings, photos.
\item All the material must have been prepared to be printed at a
high resolution ($>$1200 dpi).
\item citations should follow the style examples for books
\cite{Book94} and magazines \cite{Magazine94} (cf. References below).
\end{itemize}
If possible, \LaTeX\  users should respect the following rule
\begin{itemize}
\item Use the {\tt$\backslash$epsfbox} command to draw a
figure or image.
\item  Use Helvetica for figures.
\end{itemize}

\begin{figure*} [bth]
  \centerline{
    \epsfysize=0.8in
    \epsfbox{Figure.eps}
  }
  \caption{
    \label{Fig1}
    Example of a figure
  }
\end{figure*}

\section{Remember}
\subsection{Deadlines}
\begin{tabular}{|l|l|}
\hline
December 1, 1994 & Full papers (four hard copies) \\
                 & are submitted (to IWAFGR \\
                 & secretariat)\\
January 31, 1995 & Notification of acceptance\\
March 31, 1995 & Final versions of accepted \\
               & papers received by the \\
               & IWAFGR editors (hardcopy\\
               & as well as text and extra \\
               & material (figures, etc.) in \\
               & electronic form) \\
\hline
\end{tabular}
\newpage
\subsection{Addresses}
\begin{itemize}
\item IWAFGR local arrangement chairman\\
Dr. Martin Bichsel \\
University of Zurich\\
Department of Computer Science\\
MultiMedia Laboratory\\ 
Winterthurerstrasse 190 \\
CH-8057 Zurich\\
Switzerland \\
\begin{tabular}{ll}
Phone: & ++41 1 257 4358\\
Fax:   & ++41 1 363 0035\\
E-mail:& mbichsel@ifi.unizh.ch
\end{tabular}
\item IWAFGR secretary\\
Mrs Maja Ebner\\
MultiMedia Laboratory\\
Department of Computer Science\\
University of Zurich    \\
Winterthurerstrasse 190\\
CH-8057 Zurich \\Switzerland\\
\begin{tabular}{ll}
Phone: & ++41 1 257 4321\\
Fax:   & ++41 1 363 0035\\
E-mail:& ebner@ifi.unizh.ch\\
\end{tabular}
\end{itemize}

\begin{thebibliography}{20}

\bibitem{Book94} A.\ Author, {\it How to Cite Books},
Book Publisher Inc., 1994.
\bibitem{Magazine94} A.\ Author1, A.\ Author2, and A.\ Author3,
``How to Cite a Magazine'', Vol. 1(1), pp. 1-2, 1994.
\end{thebibliography}
\end{document}
